Jagemann Brass Casings 38 Special New Unprimed – 100 Pieces$20.00
Manufacturer Jagemann Ammo Caliber 38 Special Primer Type Small Pistol Manufacturer SKU 250009028 Quantity 100
Craft your favorite .38 Special loads with confidence when you use these "Jag Brass" casings from Jagemann Sporting Group. These rimmed casings are created on the finest machinery available under the supervision of expert personnel who draw on Jagemann company experience dating back to 1946. During production, the casings are checked for material consistency as well as corrosion resistance via mercurial nitrite testing and Vickers hardness testing. This results in brass that hand-loaders can trust for many reloading cycles with a maximum pressure rating of 20,000 PSI with +P loads.
Jagemann Stamping Company is an American manufacturer, refiner, and fabricator that has been trusted to make products for automotive, engineering, and construction industries for decades. Their stringent quality control and solid reputation has caused their brass, which is produced in Wisconsin, to be chosen by many ammo companies as a base component in their commercial recipes.
Jagemann Brass Casings 9mm Luger New Unprimed – 100 Pieces$22.00
Manufacturer Jagemann Ammo Caliber 9mm Luger (9x19) Primer Type Small Pistol Manufacturer SKU 250009024 Quantity 100
Bolster your loading bench supplies with this premium quality, new production, unprimed brass from Jagemann's Sporting Group division. "Jag Brass" casings not only fit within SAAMI specifications but are held to the same tight tolerances in measurement that are used for many match grade lineups of ammunition. These cases are meant for loading 9mm Luger cartridges and have maximum pressure rating of 38,500 PSI for +P loads. Jagemann puts their Jag Brass through a rigorous cycle of quality checks including Vickers hardness testing to check for uniform case durability as well as mercurial nitrite testing to confirm corrosion resistance. Both processes, as well as many other stringent processes, ensure that you get new brass which will stand up to multiple reloading cycles.
Jagemann Stamping Company was founded in 1946 and has evolved over time with operations in metal formation as well as plastic moldings for products used in the automotive, electrical, and solar industries to name a few. Their brass casings are produced at their Wisconsin location by a highly experienced staff using the most precise machinery available.
Jagemann Brass Casings 380 ACP New Unprimed – 100 Pieces$22.00
Manufacturer Jagemann Ammo Caliber 380 Auto (ACP) Primer Type Small Pistol Manufacturer SKU 250009023 Quantity 100
If you own a .380 Auto pocket pistol and you load your own rounds at home, then you're probably interested in finding the perfect balance in a load recipe that offers low recoil without sacrificing terminal ballistics. These Jagemann Sporting Group brass casings are perfect for experimenting with as well as for creating your perfect practice and self-defense cartridges. "Jag Brass" casings are held to ultra-tight match grade standards and then put through Vickers hardness testing as well as mercurial nitrite testing in order to test corrosion resistance and wall thickness consistency. The result is new production unprimed brass that you can trust for multiple reloading cycles. These brass cases have a max pressure rating of 21,500 PSI.
Jagemann Sporting Group is a label from Jagemann Stamping Company which goes on all of the brass leaving their Wisconsin production facility. This company has been in business since 1946 and is a highly reputable manufacturer of high quality metal parts and flexible plastics. They employ a close-knit team of experts and uses process so refined that their new production brass casings are chosen by finished ammunition manufacturers as a base component.
Jagemann Brass Casings 357 Magnum New Unprimed – 100 Pieces$24.00
Manufacturer Jagemann Ammo Caliber 357 Magnum Primer Type Small Pistol Magnum Manufacturer SKU 250009029 Quantity 100
These new production, unprimed brass casings are great loading your favorite .357 loads for plinking, hunting, competition, and self-defense. "Jag Brass" by the Jagemann Sporting Group label is some of the most tightly controlled brass in manufacture. The Jagemann inspection process includes Vickers hardness testing as well as mercurial nitrite testing which ensure corrosion resistance as well as proper material thickness and strength at all crucial areas of the casing. These all adds up to high quality casings that you can load multiple times without failure. These .357 casings are rated for a maximum pressure of 35,000 PSI.
Jagemann Stamping company was established in 1946 and is responsible for metal shaping and plastic molding that is used across many varying industries. Their brass casings are produced at their Wisconsin factory and are trusted by many ammunition companies as a base component of their finished products.
Federal Brass Casings - 270 Winchester - New Unprimed - 50$24.50
Manufacturer Federal Manufacturer SKU PR270UPB50 Quantity 50
Federal Brass Casings - 30-06 - New Unprimed - 50$25.50
Manufacturer Federal Manufacturer SKU PR3006UPB50 Quantity 50
Jagemann Brass Casings 45 ACP New Unprimed – 100 Pieces$28.00
Manufacturer Jagemann Ammo Caliber 45 ACP (Auto) Primer Type Large Pistol Manufacturer SKU 250009033 Quantity 100
These high quality rimless casings are great for reloading .45 ACP. Jag Brass, under the Jagemann Sporting Group label, is new production unprimed brass made which was previously only available to commercial ammunition manufacturers as an OEM component for their production. Now Jag Brass is available for every home reloader that demands the very best. Jagemann Stamping Company has been in business since 1946 and has a long track record of premium products with high inspection standards.
These casings have a Large Pistol primer pocket and are rated to maximum pressure of 23,000 PSI for +P .45 Auto loads. These brass casings are also held to match-grade tolerances for measurements that are even tighter than what SAAMI specifications require. Jag Brass casings undergo Vickers Hardness testing as well has mercurial nitrite testing in order to ensure each case will stand up to corrosion and possesses the proper density for the long-term durability needed to survive multiple reloading cycles.
Jagemann Brass Casings 40 S&W New Unprimed – 100 Pieces$28.50
Manufacturer Jagemann Ammo Caliber 40 Smith & Wesson Primer Type Boxer Manufacturer SKU 250009031 Quantity 100
Add some great brass to your reloading supply with these new unprimed .40 S&W casings from Jagemann. Jag Brass, under the Jagemann Sporting Group label, is new production brass that undergoes a rigorous quality proofing process in order to offer reloaders casings which will hold up to multiple cycles and handloading without failure. Mercurial nitrite testing confirms corrosion resistance while multi-point Vickers Hardness testing ensures case strength all over. These rimless casings carry a maximum pressure rating of 35,000 PSI. The brass casings are held to match-grade standards for quality fit and function and exceed the SAAMI standards.
Jag Brass is produced by Jagemann Stamping Company, a manufacturer and fabricator of metal and plastic parts since 1946. Jagemann's use of expert personnel, precise modern machinery, and exacting quality control has netted them a reputation across many industries for their small parts. Their brass, which comes from their Wisconsin location, is used as an OEM component in many brands of off-the-shelf ammunition.
Jagemann Brass Casings 357 Sig New Unprimed – 100 Pieces$33.00
Manufacturer Jagemann Ammo Caliber 357 Sig Primer Type Small Pistol Manufacturer SKU 250009026 Quantity 100
Save yourself from the trouble of neck resizing with this new production, unprimed .357 SIG brass from Jagemann Sporting Group. "Jag Brass" is produced under match-grade tolerances that are tighter than SAAMI specifications. These rimless casings then undergo Vickers hardness testing as well as mercurial nitrite testing in order to confirm proper uniform density and corrosion resistance for long life throughout multiple reloading cycles. These brass casings are rated at a maximum pressure of 40,000 PSI.
These casings are produced in Jagemann Stamping Company's plant in Wisconsin. Jagemann has experience dating back to 1946 and has always maintained a practice utilizing efficient processes coupled with expert knowledge and precision machinery. Their reputation for quality components has earned them many OEM supply contracts with the ammunition industry as well as the automotive, home hardware, and solar industries.
Jagemann Brass Casings 45 Long Colt New Unprimed – 100 Pieces$34.00
Manufacturer Jagemann Ammo Caliber 45 Long Colt Primer Type Large Pistol Manufacturer SKU 250009035 Quantity 100
These rimmed, new production, unprimed brass casings are perfect for loading your own .45 Long Colt rounds for cowboy action competitions, hunting, plinking, and self-defense. Jag Brass, by Jagemann's Sporting Group division, is some of the most precisely manufactured brass on the market today. These brass pieces have a maximum pressure rating of 14,000 PSI and undergo Vickers Hardness testing as well has mercurial nitrite testing in order to ensure each case will stand up to corrosion and possesses the proper density for the long-term durability needed to survive multiple reloading cycles. Jag Brass casings not only meet SAAMI standards but are held to match-grade tolerances in order to provide you with a solid base for your favorite bench recipes.
Jagemann Stamping Company, a longtime supplier of OEM brass to many ammunition manufacturers, was founded in 1946. They quickly developed a reputation for impressive quality and went on to produce high grade metal parts and plastics for a wide range of industries. Their brass cartridges come from their Wisconsin location are highly regarded due to the use of premium machinery as well as a well-practiced staff that never skimps on details.
Federal Brass Casings - 7.62x51mm - New Unprimed - 100$34.65
Manufacturer Federal Manufacturer SKU AE76251UPB Quantity 100
Hornady 6.5 Grendel Unprimed Brass Cases - 50$36.00
Manufacturer Hornady Ammo Caliber 6.5 Grendel Manufacturer SKU 86283 Quantity 50
Silver State Brass Casings - 300 Blackout - New Unprimed - 100$40.35
Manufacturer Nosler Ammunition Ammo Caliber 300 AAC Blackout Manufacturer SKU 75525 Quantity 100
These unprimed brass casings made by Silver State Armory are perfect for making your custom loaded 300 Blackout ammo. During the manufacturing process, this brass was annealed to ensure that it is strong and malleable to ensure you can get multiple reloads out of it.
Nosler Brass Casings - 243 Winchester - New Unprimed - 50$44.45
Manufacturer Nosler Ammunition Manufacturer SKU 10105 Quantity 50
Federal Brass Casings - 223 Rem - New Unprimed - 250$45.95
Manufacturer Federal Manufacturer SKU AE223UPB Quantity 250
Federal Brass Casings - 5.56x45mm - New Unprimed - 250$45.95
Manufacturer Federal Manufacturer SKU AE556UPB Quantity 250
Nosler Brass Casings - 270 Winchester - New Unprimed - 50$50.25
Manufacturer Nosler Ammunition Manufacturer SKU 10155 Quantity 50
Armscor Brass Casings - 300 Blackout - New Unprimed - 250$55.00
Manufacturer Armscor Primer Type Boxer Quantity 250
Nosler Brass Casings - 6.5x284 Norma - New Unprimed - 50$68.50
Manufacturer Nosler Ammunition Manufacturer SKU 10190 Quantity 50
Once Fired 7.62x51mm Brass Casings – 1000 Pieces$155.00
Manufacturer Military Surplus Ammo Caliber 308 Winchester (7.62X51) Primer Type Large Rifle Quantity 1000
This lot of brass will be a great addition to your 7.62x51mm reloading supplies. These brass casings are still fitted with their expended primers and have been only been fired once meaning they can hold up to subsequent reloading. These cases are all military surplus and have been fired from weapons that are gauged and maintained by qualified military armorers.
Don't forget to check out Widener's great selection of 308 Bullets, while you're here.
Prvi Partizan Brass Casings - 338 Lapua Mag - New Unprimed - 100$161.95
Manufacturer Prvi Partizan Quantity 100